Seamless stainless pipe starts as a round billet, gets pierced hot over a mandrel, and comes out as a tube with grain flow intact and no weld anywhere - the configuration you want when pressure, temperature or cleanliness rules out a seam. We hot-pierce and cold-draw 304/304L, 316L, 321, 310S and duplex grades, OD 6–630 mm, mostly to ASTM A312 and A269, with hydro and eddy-current testing as standard.
Grades We Keep
| Grade | UNS / EN | Corrosion character | Typical service |
|---|---|---|---|
| 304 / 304L | S30400 / 1.4301 | General atmosphere & mild chemicals | Water, food, architecture |
| 316 / 316L | S31600 / 1.4404 | Chloride resistant (2–3% Mo) | Marine, chemical, pharma |
| 321 | S32100 / 1.4541 | Ti-stabilized | Welded high-temp lines 400–800°C |
| 310S | S31008 / 1.4845 | High-temperature oxidation | Furnaces, heat treat lines |
| Duplex 2205 | S32205 / 1.4462 | Chloride + high strength | Offshore, desalination |
Size and Schedule Coverage
| Item | Range |
|---|---|
| OD | 6–630 mm (1/4"–24" NPS) |
| Wall | 0.5–50 mm; SCH 5S–160 |
| Length | 2–12 m; up to 18 m fixed |
| Delivery condition | Solution annealed, pickled; or cold drawn bright |
| Standards | A312, A269, A270, A511; EN 10216-5 |
How It Is Tested
Every length passes hydrostatic pressure to the standard; cold-drawn orders additionally get full-body eddy current. Solution annealing is verified by hardness and, when specified, by grain size. PMI by XRF on requested heats, and full 3.1 MTC per heat number ships with the pack - for pharmaceutical work we can add roughness reports on internal surfaces and 3.2 certification with inspector witness. Welded alternatives for large bore live on the welded stainless steel pipe page; the two flagship grades have their own pages at 304 stainless steel pipe and 316. Carbon-steel equivalents for non-corrosive pressure lines are under seamless carbon steel pipe.
Applications
- Heat exchanger and condenser tubing (A269/A213 sizes)
- Chemical process lines with chloride-bearing media (316L, 2205)
- Hygienic process piping in food, dairy and pharma (A270, EP/BA finishes)
- Furnace and pyrolysis coils (310S, 321)
FAQ
When must I use seamless instead of welded stainless?
High pressure, sustained temperature above ~400°C, or a spec that simply says seamless. Below those limits, quality ERW is cheaper and fine.
What is the tolerance on cold-drawn OD?
±0.10 mm typical; ±0.05 mm achievable on small sizes for instrument work.
Do you export with 3.2 certification?
Yes - SGS, BV or TUV by arrangement, witness at our works before packing.
Hot Tags: seamless stainless steel pipe, seamless stainless steel pipe China supplier, stainless seamless pipe A312
