Stainless Steel Flat Bar

Stainless Steel Flat Bar

Details
Stainless steel flat bar in 304, 304L and 316L, 3-60 mm thick by 10-200 mm wide, random or cut-to-length. China factory direct price with EN 10204 3.1 certificates, saw-cut ends and optional drilling.
Category
Stainless Steel Bars
 
Send Inquiry
Description
Technical Parameters

Stainless Steel Flat Bar

 

Henry Steel supplies stainless steel flat bars for industrial fabrication, machinery manufacturing, construction and structural applications.

 

Available grades include 304, 304L and 316L, with different thicknesses, widths and lengths to meet project requirements. Customized cutting services are available upon request.

 

Stainless steel flat bar

Stainless Steel Flat Bar Specifications

Item Specifications
Product Stainless Steel Flat Bar
Grades 304, 304L, 316L and others
Thickness 3–60 mm
Width 10–200 mm
Length Random length or cut to size
Surface Pickled or bright, subject to availability
Edge Mill edge or sawn edge
Standards ASTM A276, EN 10088-3, subject to grade and product requirements

Actual dimensions, tolerances and availability should be confirmed before ordering.

 

Grade Selection: 304L vs 316L

For flat bar the grade decision is about environment, not strength - all the common grades carry similar yield around 205-240 MPa minimum. Use 304L for indoor structures, food and beverage plants, general water and most architectural work: it is the cheapest per kilo and welds without sensitisation worries thanks to the low carbon. Step up to 316L when the bar sees chlorides: coastal structures, pool surrounds, chemical plants, desalination and shipboard fittings. The price gap between the two grades is real but small compared to the cost of replacing corroded brackets two years in, so we encourage buyers to specify 316L anywhere near salt water - the matching plate programme is documented on our 316/ 316L stainless steel plate page. For high-temperature fixtures, 310S is available from mill production, and the corrosion behaviour of each grade in pipe form is compared on our 304 stainless steel pipe page if your project mixes sections and pipe.

 

Fabrication Services: Cut, Drill, Bend

Most flat bar we ship is not sold in random lengths - it is cut to drawing. Saw cutting to length holds roughly plus or minus 1 mm; drilling and countersinking to your hole pattern removes layout work at your shop; and bending short pieces into U-straps or stiffener shapes is routine on press brakes in our service centre. Cutting tolerances, hole positions and quantities should be stated on a simple sketch with the RFQ - flat bar fabrication is fast, but only when the drawing arrives with the enquiry instead of after the price is agreed. If your bill of material pairs flat bar with sheet for gussets or covers, our 304 304L stainless steel sheet page shows the matching sheet thicknesses and finishes.

 

FAQ

1. What stainless steel grades are available for flat bars?

Common grades include 304, 304L and 316L. Other grades may be available depending on material specifications and supply conditions.

2. What sizes are available for stainless steel flat bars?

Common dimensions range from 3–60 mm in thickness and 10–200 mm in width. Customized sizes can be discussed according to project requirements.

3. What is the difference between 304 and 316L stainless steel flat bars?

304 is widely used for general fabrication and industrial applications. 316L offers better resistance to chloride-containing environments, making it more suitable for marine and certain chemical applications.

4. Can stainless steel flat bars be cut or drilled to custom sizes?

Yes. Cutting and drilling services can be arranged according to your drawings and processing requirements, subject to confirmation.

5. Do you provide material test certificates?

Material test certificates, including EN 10204 3.1, can be provided upon request, subject to the order requirements.

 

Hot Tags: stainless steel flat bar, stainless steel flat bar China supplier, 304 stainless flat bar price, 316L flat bar manufacturer, stainless steel flat bar factory

Send Inquiry
Have a Question? Get in Touch.

Whether you need product information, technical support, or a steel supply quotation, our team is ready to assist you.
Contact us by phone, email, or the inquiry form, and we will get back to you as soon as possible.

Contact now!