Stainless Steel Square Bar

Stainless Steel Square Bar

Details
Stainless steel square bar in 304, 304L and 316L, 10-100 mm square, hot rolled with rounded corners or cold drawn with sharp corners. China factory direct price, cut to length with 3.1 certificates.
Category
Stainless Steel Bars
 
Send Inquiry
Description
Technical Parameters

Stainless steel square bar occupies the middle ground between flat bar and machined blocks: it is the section behind machine bases, gate frames, fence posts, guide rails, tooling fixtures and brackets that need stiffness in both directions. It is also the section most often ordered by habit - buyers default to a size from a previous job without checking whether the corner condition or straightness still fits the application. This page lays out the sizes we supply, the practical difference between hot rolled and cold drawn square bar, and the few specification details that keep a square bar order out of trouble.

 

Stainless steel square bar

Size Range and Corner Condition

 

Item Hot Rolled Square Bar Cold Drawn Square Bar
Common sizes 20-100 mm square 10-60 mm square
Corners Rounded, radius from rolling Sharp, close to true square
Tolerance As-rolled, wider band Tighter, h11 class typical
Surface Pickled Bright
Best for Structural supports, frames, bases Machined parts, visible architectural edges, guides

Table note: sizes reflect regular stock and rolling practice; intermediate sections are produced on request subject to minimum quantity.

Corner condition is the detail that decides fit. A gate frame or railing built from hot rolled bar shows soft corners that read as "industrial" and hide weld prep nicely; a machined guide or a visible architectural edge needs the sharp corner of drawn bar, and no amount of grinding convincingly turns one into the other. State the application in the RFQ and we quote the right process instead of the convenient one.

Hot Rolled vs Cold Drawn: The Buyer's Decision

Choose hot rolled square bar when the bar will be welded into a frame or cut into blocks - the wider tolerance costs nothing in those uses and the price per kilo is lower. Choose cold drawn when the bar feeds a machining operation or when corners and surface are visible in the finished product: the tighter tolerance reduces turning allowance and the bright surface can survive to the finished part. The same logic separates our stainless steel flat bar and stainless steel round bar programmes, so a mixed order can be matched section by section under one quotation.

Grades follow the usual stainless logic: 304L for most structural and indoor work, 316L wherever chlorides or coastal air reach the bar. Certification is EN 10204 3.1 per heat with chemistry and mechanical values; for European-drawn projects we quote to EN 10088-3, and for pressure applications the equivalent A479 requirements can be met. Lengths run 3-6 m random or cut to length, and straightness is held within about 3 mm per metre so frames assemble without forcing.

Fabrication and Typical Uses

Four uses dominate demand. Machine bases and tooling fixtures use larger hot rolled sections, often cut to blank and milled on two faces. Gate, fence and railing frames use 30-50 mm sections chosen for weldability and paint-free appearance. Guide rails and wear strips use drawn bar where the sharp edge and bright finish carry function, not just looks. And retrofit brackets use small squares because a square section resists rotation better than a flat one of similar weight. For projects that pair square bar with tubular handrail, our 304 stainless steel pipe page lists the tube sizes that sit naturally alongside the bar programme, and cut, drill and weld-prep services are available on all sections before shipment.

FAQ

1. What stainless steel grades are available for square bars?

Common grades include 304, 304L and 316L. Other grades may be available upon request, depending on material specifications and supply conditions.

2. What sizes are available for stainless steel square bars?

Stainless steel square bars are available in different dimensions, including 10 mm to 100 mm sections. Actual size availability should be confirmed according to the required production method and order quantity.

3. What is the difference between hot rolled and cold drawn square bars?

Hot rolled square bars generally have rounded corners and are suitable for structural fabrication. Cold drawn square bars typically have sharper corners, a smoother surface and closer dimensional tolerances, making them suitable for machining applications.

4. Can stainless steel square bars be cut to custom lengths?

Yes. Cutting to specified lengths can be arranged according to your project requirements. Please provide the required dimensions and quantities when requesting a quotation.

5. Can you provide material test certificates?

Material test certificates can be provided upon request, subject to the material grade, applicable standards and order requirements.

 

Hot Tags: stainless steel square bar, stainless steel square bar China supplier, 304 stainless square bar price, 316L square bar manufacturer, stainless square bar factory

Send Inquiry
Have a Question? Get in Touch.

Whether you need product information, technical support, or a steel supply quotation, our team is ready to assist you.
Contact us by phone, email, or the inquiry form, and we will get back to you as soon as possible.

Contact now!